The accessories you use with your motorcycle and the manner in which you load your gear onto the bike might create hazards.
Aerodynamics, handling, balance, and cornering clearance can suffer, and the suspension and tires can be overloaded. Read the "accessory use and motorcycle loading" section.
Rear brake pedal adjustment
The rear brake pedal position
must be properly adjusted at all
times or the disk brake pads will
bear against the disk causing
damage to the pads and to the
disk surface. Adjust the brake
pedal posit~ on in the following
manner:
Loosen lock nut 1, and turn
the push rod 2 to locate t ...
Oil cooler / oil cooler hose inspection and
cleaning
Refer to “exterior parts removal and installation” in section 9d .
Oil cooler hose inspection
Inspect the oil cooler hoses for any damage and oil
leakage. If any defects are found, replace the oil cooler
hose with a new one.
Oil cooler inspection
Remove the oil cooler guard (1).
...
General precautions
Proper service and repair procedures are
important for the safety of the service
mechanic and the safety and reliability of
the motorcycle.
When 2 or more persons work together,
pay attention to the safety of each other.
When it is necessary to run the ...