Suzuki GSX-R 1000 Owners Manual: Batiery
The battery is located under the front seat. Remove the front seat by referring to the seat lock and helmet holders section.
This battery is sealed type and requires no maintenance.
Have your dealer check the battery's state of charge periodically.
The standard charging rate is 1.2A x 5 to 1 0 hours and maximum rate is s.Oa x 1 hour. Never exceed maximum charging rate.
 Warning
Wash hands after handling. |
| Warning
Keep flames and sparks away from the battery. Never smoke when working near the battery. |
|
Caution Exceeding the maximum charging rate for the battery can shorten its life. Never exceed the maximum charging rate |
|
Caution Reversing the battery lead wires can damage the charging system and the battery. The red lead must go to the positive (+) terminal and the black (or black with white tracer) lead must go to the neg· ative (-) terminal. |
Lubrication points
Proper lubrication is important for
smooth operation and long life of
each working part of your motorcycle
and also for safe riding. It is
a good practice to lubricate the
motorcycle after a long ...
Air cleaner
The air cleaner element must be
kept clean to provide good engine
power and g1as mileage. If you use
your motorcycle under normal
low-stress conditions, you should
service the air cleaner at the ...
Other materials:
Evap canister hose routing diagram (only
for e-33)
Evap system purge control solenoid valve
Surge hose
Purge hose
Fuel shut-off valve
Rear fender
Evap canister
Seat hook
White marking
Yellow marking
Up
Face the
clamp end downward
Face the
clamp end to the left
Pass the
...
Water pump related parts inspection
Refer to “water pump disassembly and assembly” .
Mechanical seal
Visually inspect the mechanical seal for damage, with
particular attention given to the sealing face.
Replace the mechanical seal that shows indications of
leakage.
Oil seal
Visually inspect the oil seal for damage, with p ...
Air bleeding from brake fluid circuit
Air trapped in the brake fluid circuit acts like a cushion to
absorb a large proportion of the pressure developed by
the master cylinder and thus interferes with the full
braking performance of the brake caliper. The presence
of air is indicated by “sponginess” of the brake lever and
also by la ...