|
Oil pan / oil pressure regulator / oil strainer
removal and installation
Note
the oil pan/oil strainer/oil pressure regulator
cannot be serviced with the engine installed
in the frame.
Removal
Remove the engine assembly from the frame. Refer to “engine assembly
removal” in section 1d .
Remove the plate (1).
Remove the oil pan ...
Stp sensor removal and installation
Removal
Remove the throttle body. Refer to “throttle body
removal and installation” in section 1d (page 1d-
10).
Remove the stp sensor (1) with the special tool.
Special tool
: 09930–11950 (torx wrench (5 mm))
Note
prior to disassembly, mark the stp sensor’s
origina ...
Fuel mesh filter inspection and cleaning
Inspect the fuel mesh filter in the following procedures:
remove the fuel mesh filter. Refer to “fuel pump disassembly and
assembly” .
If the fuel mesh filter is clogged with foreign particles,
it hinders smooth gasoline flow resulting in loss of
engine power. Such a filter ...