Removal
Installation
Install the cam chain guides/cam chain tensioner in the reverse order of removal.
Exterior parts removal and installation
Side frame cover
Removal
Note
the left and right side frame covers are
installed symmetrically and therefore the
removal/installation procedure for one side is
the same as that for the other side.
Remove the bolt (1).
Remove the side frame cover (2).
...
Battery current leakage inspection
Inspect the battery current leakage in the following
procedures:
turn the ignition switch off.
Remove the front seat. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Disconnect the battery (–) lead wire.
Measure the current betwee ...
Oil pump inspection
Inspect the oil pump in the following procedures:
remove the oil pump. Refer to “oil pump removal and installation” .
Rotate the oil pump by hand and check that it moves
smoothly. If it does not move smoothly, replace the
oil pump assembly.
Caution
do not attempt t ...