Suzuki GSX-R 1000 Service Manual: Cam chain guide inspection
Inspect the cam chain guide in the following procedures:
- remove the cam chain guides. Refer to “cam chain guide / cam chain tensioner removal and installation” .
- Check the contacting surface of the cam chain guides. If it is worn or damaged, replace it with a new one.
- Install the cam chain guides. Refer to “cam chain guide / cam chain tensioner removal and installation” .
Cam chain guide / cam chain tensioner
removal and installation
Removal
Remove the cylinder head cover. Refer to “engine top side disassembly” .
Remove the cam chain guide no. 2 (1).
Remove the cylinder head. Refer to “engine top side disasse ...
Cam chain tensioner inspection
Inspect the cam chain tensioner in the following
procedures:
remove the cam chain tensioner. Refer to “cam chain guide / cam chain
tensioner removal and installation” .
Check the ...
Other materials:
Rear brake caliper disassembly and
assembly
Refer to “rear brake caliper removal and installation” .
Disassembly
Remove the pad spring (1) and rubber boot (2) from
the caliper.
Place a rag over the piston to prevent it from popping
out and then force out the piston using compressed
air.
Caution
do not use hig ...
Steering system inspection
Inspect steering system
initially at 1 000 km (600 miles, 2 months) and every
12 000 km (7 500 miles, 24 months) thereafter
Steering should be adjusted properly for smooth turning
of handlebars and safe running. Overtighten steering
prevents smooth turning of the handlebars and too loose
steer ...
Front brake caliper removal and installation
Note
the right and left calipers are installed
symmetrically and therefore the removal
procedure for one side is the same as that for
the other side.
Removal
Drain brake fluid. Refer to “brake fluid replacement” in section 4a .
Remove the brake hose from the cali ...