Suzuki GSX-R 1000 Service Manual: Clutch components

Suzuki GSX-R 1000 Service Manual / Transmission / transaxle / Clutch / Repair instructions / Clutch components

Suzuki GSX-R. Clutch components

Clutch pressure plate
Clutch push piece
No. 1 Drive plate (8 pcs.)
No. 3 Driven plate (0 – 2 pcs.)
No. 1 Driven plate (5 – 7 pcs.)
No. 2 Driven plate (1 pc.)
No. 2 Drive plate (1 pc.)
Spring washer
Spring washer seat
Clutch sleeve hub
Seat washer
Wave spring washer
Clutch lifter driven cam
Clutch lifter drive cam
Primary driven gear assembly
Push rod
10 N·m (1.0 Kgf-m, 7.0
Lbf-ft)
95 N·m
(9.5 Kgf-m, 68.7 Lbf-ft)

Apply engine oil.

Clutch control system components

Push rod Clutch release camshaft Clutch release arm Clutch cable 1 N·m (0.1 Kgf-m, 0.7 Lbf-ft) 6 N·m (0.6 Kgf-m, 4.5 Lbf-ft) 10 N·m (1.0 ...

Clutch removal

Drain engine oil. Refer to “engine oil and filter replacement” in section 0b . Lift and support the fuel tank with the prop stay. Refer to “fuel tank removal and installation” in secti ...

Other materials:

Cam chain guide inspection
Inspect the cam chain guide in the following procedures: remove the cam chain guides. Refer to “cam chain guide / cam chain tensioner removal and installation” . Check the contacting surface of the cam chain guides. If it is worn or damaged, replace it with a new one. ...

Stp sensor adjustment
Adjust the stp sensor in the following procedures: remove the air cleaner box cover. Refer to “air cleaner element removal and installation” in section 1d . Disconnect the stva lead wire coupler (1). Insert the needle pointed probes to the stp sensor coupler (between y/w a ...

Storage procedure
If your motorcycle is to be left unused for an extended period of time, it needs special servicing requiring appropriate materials, equipment and skill. For this reason, suzuki recommends that you trust this maintenance work to your suzuki dealer. If you wish to service the machine for stora ...