If no continuity is indicated (infinity or over limit), the circuit is open between terminals “a” and “c”.
If no continuity is indicated, the circuit is open between couplers “a” and “b-1”. If continuity is indicated, there is an open circuit between couplers “b-2” and “c” or an abnormality in coupler “b-2” or coupler “c”.
Cylinder inspection
Refer to “engine top side disassembly” .
Refer to “engine top side assembly” .
Cylinder distortion
Check the gasket surface of the cylinder for distortion.
Use a straightedge and thickness gauge. Take clearance
readings at several places. If any reading exceeds the
service limit, replace t ...
Rear brake master cylinder parts inspection
Refer to “rear brake master cylinder disassembly and assembly” .
Master cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston / rubber parts
Inspect the piston surface for any scratches or other
damage.
Inspect the primary cup, secondary cup and dust boot
...
Rear suspension components
Rear shock absorber
Rear shock absorber mounting nut
Cushion rod
Cushion rod mounting nut
Cushion lever
Cushion lever mounting nut
Swingarm pivot lock-nut
Swingarm pivot shaft
Swingarm pivot nut
Swingarm
Chain case
Plate
Chain adjus ...