Suzuki GSX-R 1000 Owners Manual: Corrosion prevention
It is important to take good care of your motorcycle to protect it from corrosion and keep it looking new for years to come.
Important information about corrosion
Common causes of corrosion
- Accumulation of road salt, dirt, moisture, or chemicals in hardto- reach areas.
- Chipping, scratches, and any damage to treated or painted metal surfaces resulting from minor accidents or impacts from stones and gravel.
Road salt, sea air, industrial pollution, and high humidity will all contribute to corrosion.
How to help prevent corrosion
- Wash your motorcycle frequently,
at least once a month.
Keep your motorcycle as clean and dry as possible.
- Remove foreign material
deposits. Foreign material
such as road salt, chemicals,
road oil or tar, tree sap, bird
droppings and industrial fall out
may damage your motorcycle's
finish. Remove these
types of deposits as quickly as
possible. If these deposits are
difficult to wash off, an additional
cleaner may be required.
Follow the manufacturer's directions when using these special cleaners.
- Repair finish damage as soon
as possible. Carefully examine
your motorcycle for damage
to the painted surfaces.
Should you find any chips or scratches in the paint, touch them up immediately to prevent corrosion from starting. If the chips or scratches have gone through to the bare metal, have a suzuki dealer make the repair.
- Store your motorcycle in a dry, well-ventilated area. If you often wash your motorcycle in the garage or if you frequently park it inside when wet, your garage may be damp. The high humidity may cause or accelerate corrosion. A wet motorcycle may corrode even in a heated garage if the ventilation is poor.
- Cover your motorcycle. Exposure to mid-day sun can cause the colors in paint, plastic parts, and instrument faces to fade. Covering your motorcycle with a high-quality, "breathable" motorcycle cover can help protect the finish from the harmful uv rays in sunlight, and can reduce the amount of dust and air pollution reaching the surface. Your suzuki dealer can help you select the right cover for your motorcycle.
Procedure for returning
to service
Clean the entire motorcycle.
Remove the oily rags from the
air cleaner intake and muffler
outlet.
Drain all the engine oil. Install
a new oil filter and fill the
engine with ...
Other materials:
General description
Fuel injection system description
Fuel system
The fuel delivery system consists of the fuel tank (1), fuel pump (2), fuel
filter (3), fuel feed hose (4), fuel delivery pipes
(5) including fuel injectors (6) and (7), fuel pressure regulator (8). There is
no fuel return hose. The fuel in the fu ...
Fuel pump disassembly and assembly
Disassembly
Remove the fuel tank. Refer to “fuel tank removal and installation” .
Remove the fuel pump assembly (1) by removing its
mounting bolts diagonally.
Spilled gasoline should be wipe off
immediately.
Keep away from fire or spark.
Work in a wel ...
Starting the engine
Before attempting to start the
engine, make sure:
The transmission is in neutral.
The engine stop switch is in
the "" position.
Note: this motorcycle has a
starter interlock system for the
ignition and starter circuit. The
engine can only be started if:
...