Suzuki GSX-R 1000 Service Manual: Crankcase breather (pcv) cover inspection
Inspect the crankcase breather (pcv) cover in the following procedures:
- remove the crankcase breather (pcv) cover. Refer to “crankcase breather (pcv) hose / reed valve / cover removal and installation” .
- Inspect the crankcase breather (pcv) cover for carbon deposit. If carbon deposit is found in the crankcase breather (pcv) cover, remove the carbon.
- Reinstall the crankcase breather (pcv) cover. Refer to “crankcase breather (pcv) hose / reed valve / cover removal and installation” .
Crankcase breather (pcv) hose / reed
valve / cover removal and installation
Removal
Lift and support the fuel tank with the prop stay.
Refer to “fuel tank removal and installation” in section 1g .
Remove the air cleaner box. Refer to “air cleaner box removal and ...
Evaporative emission control system
removal and installation (only for e-33)
Hose
removal
Lift and support the fuel tank. Refer to “fuel tank
removal and installation” in section 1g (page 1g-
9).
Remove the frame cover assembly. Refer to “exterior parts remova ...
Other materials:
Cushion rod removal and installation
Removal
Remove the right side cowling and side frame covers. Refer to “exterior
parts removal and installation” in section 9d .
Support the motorcycle with a jack to relieve load on
the cushion rod.
Remove the muffler chamber. Refer to “muffler / muffler chamber /
exhaust ...
Component location
Electrical components location
Ignition switch/immobilizer antenna
Iat sensor
Secondary fuel injector
Primary fuel injector
Iap sensor
Evap system purge control solenoid valve
Fuel pump relay
Turn signal/side-stand relay
Cooling fan relay
Ect ...
Rear brake disc inspection
Brake disc thickness
Check the brake disc for damage or cracks and measure
the thickness using the micrometer.
Replace the brake disc if the thickness is less than the
service limit or if defect is found.
Special tool
(a): 09900–20205 (micrometer (0 –
25 mm))
Brake disc thickness
service ...