Refer to “cushion rod removal and installation” .
Collar and spacer
Cushion rod bearing
Cushion rod
Inspect the cushion rod for damage. If any defects are found, replace the cushion rod with a new one.
Exhaust control system construction
Excv cable no. 1 (Cl)
Excv cable no. 2 (Op)
When
loosening or tightening the pulley bolt, be sure to fix the
pulley with an adjustable wrench, or excva may get damaged.
5 N·m (0.5 Kgf-m, 3.5 Lbf-ft)
42 – 43 Mm (1.65 – 1.69 In)
60 – 61 Mm (2.36 – ...
Diagnostic information and procedures
Engine mechanical symptom diagnosis
Refer to “engine symptom diagnosis” in section 1a .
Compression pressure check
The compression pressure reading of a cylinder is a
good indicator of its internal condition.
The decision to overhaul the cylinder is often based on
the results of a compressio ...
Windshield cleaning
Clean the windshield with soft
cloth and warm water with mild
detergent. If scratched, polish
with a commercially available
plastic polish. Replace the windshield
if it becomes scratched or
discolored so as to obstruct view.
When replacing the windshield,
use suzuki replacement windshield. ...