Suzuki GSX-R 1000 Service Manual: Diagnostic information and procedures
Engine cooling symptom diagnosis
Schematic and routing diagram
Cooling circuit diagram
Water hose routing diagram
Thermostat air bleeder hole
Cushion
O-ring
Radiator heat guard
: be careful not to damage the pawls when ...
Other materials:
Battery current leakage inspection
Inspect the battery current leakage in the following
procedures:
turn the ignition switch off.
Remove the front seat. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Disconnect the battery (–) lead wire.
Measure the current betwee ...
Cylinder head related parts inspection
Refer to “cylinder head disassembly and assembly” .
Cylinder head distortion
Decarbonize the combustion chambers.
Check the gasket surface of the cylinder head for
distortion. Use a straightedge and thickness gauge.
Take clearance readings at several places. If
readings exceed the ...
Exhaust emission control system
description
The exhaust emission control system is composed of the pair system, exhaust
control system, ho2 sensor, threeway
catalyst system and isc system. The fresh air is drawn into the exhaust ports
through the pair control solenoid
valve and pair reed valves. The pair control solenoid valve is operat ...