Suzuki GSX-R 1000 Owners Manual: Drive chain
This motorcycle has a master link type drive chain. We recommend that you take your motorcycle to an authorized suzuki dealer if the drive chain needs replacing.
The condition and adjustment of the drive chain should be checked each day before you ride. Always follow the guidelines for inspecting and servicing the chain.
 Warning
Inspect, adjust, and maintain the chain properly before each ride, according to this section. |
Engine coolant
Coolant level
The engine coolant solution
should be between "f" (full) and
"1..:' (Low) level lines on the engine
coolant reservoir. If the level is
lower than "1..:' (Low ...
Inspecting the drive chain
When inspecting the chain, look
for the following:
loose pins
damaged rollers
dry or rusted links
kinked or binding links
excessive wear
improper chain adj ...
Other materials:
Specifications
Service data
Wheel
unit: mm (in)
Tire
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Front wheel components” “front wheel assembly construction”
“rear wheel components” “rear wheel assembly c ...
Side stand
An interlock switch is provided to
cut off the ignition circuit when the
side stand is down and the transmission
is in any gear other than
neutral.
The side stand/ignition interlock
switch works as follows:
if the side stand is down and
the transmission is in gear, the
engine ...
Specifications
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Chassis bolt and nut inspection”
Reference: for the tightening torque of fastener not specified in this
section, refer to “tightening torque list” in section 0c . ...