Suzuki GSX-R 1000 Service Manual: DTC “c42” (p1650): ig switch circuit malfunction

Suzuki GSX-R 1000 Service Manual / Engine / Engine general information and diagnosis / Diagnostic information and procedures / DTC “c42” (p1650): ig switch circuit malfunction

Detected condition and possible cause

Detected condition

Possible cause

Ignition switch signal is not input to the ecm.

Ignition system circuit open or short.
Ecm malfunction.

When the id agreement is not verified.

Ecm does not receive communication signal from the immobilizer antenna.

(For e-02, 19, 24, 51)

Immobilizer system malfunction.

(For e-02, 19, 24, 51)

Troubleshooting

Note

refer to “ignition switch inspection” in section 9c for details.
After repairing the trouble, clear the dtc using sds tool. Refer to “use of sds diagnosis reset procedures” .

DTC “c41” (p2505): ecm power input signal malfunction

Detected condition and possible cause Detected condition Possible cause C41/P2505 No voltage is applied to the ecm. Lead wire/coupler connection of ecm t ...

DTC “c44” (p0130/p0135): ho2 sensor (ho2s) circuit malfunction

Detected condition and possible cause Detected condition Possible cause C44/P0130 Ho2 sensor output voltage is not input to ecm during engine operation and running ...

Other materials:

Serial number location
You need to know the frame and engine serial numbers to get title documents for your motorcycle. You also need these numbers to help your dealer when you order parts. The frame number 1 is stamped on the steering head as shown in the illustration. The engine serial number 2 Is stamped ...

Special tools and equipment
Recommended service material Note required service material is also described in the following. “Drive chain related components” Special tool ...

Specifications
Service data Electrical unit: mm (in) Tightening torque specifications Reference: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c . ...