In the lcd (display) panel, the malfunction code is indicated from small code to large code.
*1 To get the proper signal from the throttle position sensor, the sensor basic position is indicated in the lcd (display) panel. The malfunction code is indicated in three digits. In front of the three digits, a line appears in any of the three positions, upper, middle or lower line. If the indication is upper or lower line when engine rpm is 1 200 r/min, slightly turn the throttle position sensor and bring the line to the middle.
Foreword
Motorcycling is one of the most
exhilarating sports and to ensure
your riding enjoyment, you should
become thoroughly familiar with
the information presented in this
owner's manual before riding the
motorcycle.
The proper care and maintenance
that your motorcycle requires is
outlined in t ...
Air cleaner
The air cleaner element must be
kept clean to provide good engine
power and g1as mileage. If you use
your motorcycle under normal
low-stress conditions, you should
service the air cleaner at the intervals
specified. If you ride in dusty,
wet, or muddy conditions, you will
need to inspect the ...
Component location
Electrical components location
Ignition switch/immobilizer antenna
Iat sensor
Secondary fuel injector
Primary fuel injector
Iap sensor
Evap system purge control solenoid valve
Fuel pump relay
Turn signal/side-stand relay
Cooling fan relay
Ect ...