Suzuki GSX-R 1000 Owners Manual: Engine coolant solution
Use engine coolant that is com· patible with an aluminum radiator, mixed with distilled water at a 50:50 mixture ratio for engine coolant solution. An engine coolant mixture other than 50:50 can affect cooling efficiency or rust inhibiting performance.
Engine coolant
Engine coolant should be used at all times in your motorcycle's radiator, even if the temperature in your area does not go down to the freezing point. Engine coolant acts as a rust inhibitor and water pump lubricant as well as an antifreeze solution.
 Warning
Do not drink antifreeze or cool· ant solution. If swallowed, do not induce vomiting. Lmmedi· ately contact a poison control center or a physician. Avoid inhaling mist or hot vapors; if inhaled, remove to fresh air. If coolant gets in eyes, flush eyes with water and seek medical attention. Wash thoroughly after handling. Solution can be poisonous to animals. Keep out of the reach of children and animals. |
|
Caution Spilled engine coolant can damage painted surfaces. Do not spill any fluid when fill· ing the radiator. Wipe spilled engine coolant up immediately. |
Water for mixing
Use distilled water only. Water other than distilled water can corrode and clog the aluminum radiator.
Required arnount of engine coolant/ water solution capacity (total): 2400 ml (5.1 Us pt)
Engine oil
Oil quality is a major contributor to
your engine's performance and
life. Always select good quality
engine oil. Suzuki recommends
the use of suzuki performance
4 motor oil or equivalent
engine ...
Other materials:
Steering / steering damper removal and
installation
Removal
steering damper
Turn the ignition switch off.
Disconnect the steering damper solenoid coupler
(1).
Remove the lower bracket cover (2).
Remove the steering damper mounting nut (3) while
holding the lock-nut (4).
Remove the steering damper mounting bolt ( ...
Exhaust control system description
The exhaust control system (excs) consists of the exhaust control valve (excv),
exhaust control valve actuator
(excva) and exhaust control valve cables (excv cables).
Excv is installed in the exhaust pipe. Excva is mounted inside of the right
frame. The excv is operated by the
excva via the ...
Handlebar removal and installation
Removal
Remove the following parts from the left handlebar.
left handlebar switch box (1)
handlebar balancer (2)
grip rubber (3)
clutch cable (4)
Remove the following parts from the right handlebar.
right handlebar switch box (5)
...