Apply muffler seal
|
Iap sensor removal and installation
Removal
Lift and support the fuel tank. Refer to “fuel tank
removal and installation” in section 1g (page 1g-
9).
Disconnect the coupler (1) and vacuum hose (2).
Remove the iap sensor (3) from the air cleaner box.
Installation
Install the iap sensor in the reverse ord ...
DTC “c11” (p0340): cmp sensor circuit
malfunction
Detected condition and possible cause
Detected condition
Possible cause
The signal does not reach ecm for 3 sec. Or more, after
receiving the starter signal.
Cmp sensor circuit open or short.
Cmp sensor malfunction.
Ecm malfunction.
...
Gearshift shaft / gearshift cam plate components
Gearshift shaft
Gearshift cam drive plate
Gearshift cam plate
Gearshift cam stopper
19 N·m (1.9 Kgf-m,
13.5 Lbf-ft)
13 N·m
(1.3 Kgf-m, 9.5 Lbf-ft)
8.5 N·m
(0.85 Kgf-m, 6.0 Lbf-ft)
Apply grease to oil
seal lip.
Apply thread l ...