Refer to “front brake master cylinder assembly removal and installation” .
Disassembly
Assembly
Assemble the master cylinder in the reverse order of disassembly. Pay attention to the following points:
Caution
|
Bf: brake fluid (dot 4)
: Grease 99000–25100 (suzuki
silicone
grease or equivalent)
: Grease 99000–25100 (suzuki
silicone
grease or equivalent)
Tightening torque brake lever pivot bolt (a): 1 n·m (0.1 Kgf-m, 0.5 Lbf-ft) brake lever pivot bolt lock-nut (b): 6 n·m (0.6 Kgf-m, 4.5 Lbf-ft)
Throttle valve synchronization
Check and adjust the throttle valve synchronization
among four cylinders.
Start the engine and run it in idling condition
for
warming up.
Stop the warmed-up engine.
Lift and support the fuel tank. Refer to “fuel
tank
removal and installation” in section 1g (page ...
Specifications
Service data
Electrical
unit: mm
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Starter motor components”
Reference: for the tightening torque of fastener not specified in this
section, refer to “tightening to ...
Exhaust control system construction
Excv cable no. 1 (Cl)
Excv cable no. 2 (Op)
When
loosening or tightening the pulley bolt, be sure to fix the
pulley with an adjustable wrench, or excva may get damaged.
5 N·m (0.5 Kgf-m, 3.5 Lbf-ft)
42 – 43 Mm (1.65 – 1.69 In)
60 – 61 Mm (2.36 – ...