Suzuki GSX-R 1000 Service Manual: Front brake pad inspection
The extent of brake pads wear can be checked by observing the grooved limit line “a” on the pads. When the wear exceeds the grooved limit line, replace the pads with new ones. Refer to “front brake pad replacement” .
| Caution replace the brake pad as a set, otherwise braking performance will be adversely affected. |
Front brake components
Seal set
Piston and seal set
Brake pad spring
Brake pad set
Front brake disc
7.5
N·m (0.75 Kgf-m, 5.5 Lbf-ft)
15 N·m (1.5
Kgf-m, 11.0 Lbf-ft)
...
Front brake pad replacement
Loosen the pad mounting pins (1).
Remove the brake caliper by removing the caliper
mounting bolts (2).
Remove the pad mounting pins (1), brake pads and
spring.
Caution ...
Other materials:
Corrosion prevention
It is important to take good care of
your motorcycle to protect it from
corrosion and keep it looking new
for years to come.
Important information about
corrosion
Common causes of corrosion
Accumulation of road salt, dirt,
moisture, or chemicals in hardto-
reach areas.
Chipping ...
Front brake master cylinder parts inspection
Refer to “front brake master cylinder / brake lever disassembly and assembly”
.
Master cylinder
Inspect the master cylinder bore for any scratches or
other damage
Piston / rubber parts
Inspect the piston surface for any scratches or other
damage.
Inspect the primary cup, secondary cup ...
Fuel discharge amount inspection
Keep away from fire or spark.
Spilled gasoline should be wiped off
immediately.
Work in a well-ventilated area.
Inspect the fuel discharge amount in the following
procedures:
lift and support the fuel tank. Refer to “fuel tank remo ...