To remove the front seat.
To reinstall the seat, slide the seat hooks into the seat hook retainers on the frame and tighten the bolts securely.
Warning
Fasten the seat securely in its proper position. |
Crankshaft journal bearing inspection and
selection
Refer to “engine bottom side disassembly” (page 1d-
49).
Refer to “engine bottom side assembly” .
Inspection
Inspect each upper and lower crankcase bearing for
any damage.
Set the crankshaft onto the upper crank case.
Install the plastigauge onto each crankshaft jour ...
Radiator reservoir tank inspection
Inspect the radiator reservoir tank in the following
procedures:
remove the right side cowling. Refer to “exterior parts removal and
installation” in section 9d .
Inspect the radiator reservoir tank (1) for leaks. If any
defects are found, replace the radiator reservoir tank
...
Air cleaner element inspection
Inspect air cleaner element
every 6 000 km (4 000 miles, 12 months)
Inspection
Remove the air cleaner element. Refer to “air cleaner element removal
and installation” in section 1d .
Inspect the air cleaner element for clogging. If it is
clogged with dirt, replace it with a new on ...