Toyota RAV4 manuals

Suzuki GSX-R 1000 Service Manual: Front turn signal light removal and installation

Suzuki GSX-R 1000 Service Manual / Body and accessories / Lighting systems / Repair instructions / Front turn signal light removal and installation

Removal

  1. Remove the screw.

Suzuki GSX-R. Front turn signal light removal and installation


  1. Disconnect the front turn signal coupler (1).
  2.  Remove the turn signal light assembly (2).

Suzuki GSX-R. Front turn signal light removal and installation


Installation

Install the front turn signal light in the reverse order of removal.

Front turn signal light components
Turn signal light bulb (12 v 21 w) Front turn signal light Socket ...

Front turn signal light bulb replacement
Caution when you touch the bulb with your bare hands, clean the bulb with a cloth moistened with alcohol or soap water to prevent premature bulb failure. Remove the turn si ...

Other materials:

Fuel pressure inspection
Keep away from fire or spark. Spilled gasoline should be wiped off immediately. Work in a well-ventilated area. Inspect the fuel pressure in the following procedures:  lift and support the fuel tank. Refer to “fuel tank removal and installati ...

Rear brake caliper removal and installation
Removal Remove the rear wheel. Refer to “rear wheel assembly removal and installation” in section 2d .  Drain brake fluid. Refer to “brake fluid replacement” in section 4a .  Remove the brake hose from the caliper by removing the union bolt (1) and catch the brake fluid in a ...

Front brake disc inspection
Brake disc thickness Check the brake disc for damage or cracks and measure the thickness using the micrometer. Replace the brake disc if the thickness is less than the service limit or if defect is found. Special tool (a): 09900–20205 (micrometer (0 – 25 mm)) Brake disc thickness service ...

© 2011-2024 Copyright www.suzukigsxr.org