Inspect the fuel level gauge in the following procedures:
Special tool
: 09900–25008 (multi circuit tester
set)
Tester knob indication resistance (Ω)
|
Speedometer inspection
If the speedometer, odometer or tripmeter does not function properly, inspect the speed sensor and the coupler connections. If the speed sensor and coupler connections are ok, replace the combination meter unit with a new one. Refer to “combination meter removal and installation” .
Iat sensor inspection
Refer to “dtc “c21” (p0110-h/l): iat sensor circuit malfunction” in section
1a .
Inspect the iat sensor.
Note
iat sensor resistance measurement method
is the same way as that of the ect sensor.
Refer to “ect sensor inspection” (page 1c-
4).
Caution
& ...
Foreword
Motorcycling is one of the most
exhilarating sports and to ensure
your riding enjoyment, you should
become thoroughly familiar with
the information presented in this
owner's manual before riding the
motorcycle.
The proper care and maintenance
that your motorcycle requires is
outlined in t ...
Charging system symptom diagnosis
Condition
Possible cause
Correction / reference item
Generator does not
charge
Open- or short-circuited lead wires, or
loose lead connections.
Repair, replace or connect properly.
Short-circuited, grounded or open
generator coil.
Replace
...