Disassembly
|
Caution never remove the fuel pressure regulator (5) from the holder. |
Assembly
Refer to “fuel mesh filter inspection and cleaning” .
Assemble the fuel tank pump in the reverse order of the disassembly. Pay attention to the following points:
Caution
|
Caution connect all lead wires securely so as not to cause contact failure. |
|
: Grease 99000–25010 (suzuki
super
grease “a” or equivalent)
The o-ring
must be replaced with a new one to prevent fuel leakage. |
Tightening torque fuel pump mounting bolt (a): 10 n·m (1.0 Kgf-m, 7.0 Lbf-ft)
Combination meter inspection
Led inspection
Check that the leds “a” (fi, fuel, engine rpm, oil
pressure/engine coolant, immobilizer (e-02, 19, 24, 51)
and meter panel illumination) immediately light up when
the ignition switch is turned on.
Check that the other leds “b” (neutral, high-beam and
turn signal indicator ligh ...
Steering / steering damper related parts
inspection
Refer to “steering / steering damper removal and installation” .
Inspect the removed parts for the following
abnormalities:
Steering stem
Distortion of the steering stem and brackets.
Bearing
Bearing wear or damage
abnormal bearing noise
race wear or damage
&nbs ...
Specifications
Service data
Wattage
unit: w
Tightening torque specifications
Reference: for the tightening torque of fastener not specified in this
section, refer to “tightening torque list” in section 0c . ...