Suzuki GSX-R 1000 Service Manual: Fuel pump inspection
Turn the ignition switch on and check that the fuel pump operates for a few seconds.
If the fuel pump motor does not make operating sound, inspect the fuel pump circuit connections or inspect the fuel pump relay and to sensor. Refer to “fuel pump relay inspection” and “dtc “c23” (p1651- h/l): to sensor circuit malfunction” in section 1a .
If the fuel pump relay, to sensor and fuel pump circuit connections are ok, the fuel pump may be faulty, replace the fuel pump with a new one. Refer to “fuel pump disassembly and assembly” .
Fuel pressure inspection
Keep away from fire or spark.
Spilled gasoline should be wiped off
immediately.
Work in a well-ventilated area.
Inspect the fuel pressure in the following ...
Fuel discharge amount inspection
Keep away from fire or spark.
Spilled gasoline should be wiped off
immediately.
Work in a well-ventilated area.
Inspect the fuel discharge amo ...
Other materials:
Front fork components
Front fork cap
O-ring
Rebound damping force adjuster rod
Compression damping force adjuster rod
Piston rod nut
O-ring
Piston ring
Rod guide case
Spring
Piston rod
Spring collar b
Spring
Spring collar a
Slide bushing
Outer tu ...
Procedure for returning
to service
Clean the entire motorcycle.
Remove the oily rags from the
air cleaner intake and muffler
outlet.
Drain all the engine oil. Install
a new oil filter and fill the
engine with fresh oil as outlined
in this manual.
Remove the spark plugs. Turn
the engine a few tim ...
Specifications
Service data
Electrical
unit: mm (in)
Tightening torque specifications
Reference: for the tightening torque of fastener not specified in this
section, refer to “tightening torque list” in section 0c . ...