Suzuki GSX-R 1000 Owners Manual: Fuel supply check
If the fuel injection indicator displays "fi", showing signs of trouble in the fuel injection system, take your machine to an authorized suzuki dealer. Refer to the "instrument panel:' section for fuel injection system indicator explanation. If the indicator does not display "fi", make sure there is enough fuel in the fuel tank. If the indicator does not display "fi" and there is enough fuel, ignition system should be checked.
Troubleshooting
This troubleshooting guide is provided
to help you find the cause of
some common complaints.
Caution
Failure to troubleshoot a problem
correctly can damage your
motorcycle. Impr ...
Ignition system check
Remove the spark plugs and
reattach them to the spark
plug caps.
Put the engine stop switch in
the "" position and ignition
switch in the "on" position.
Whil ...
Other materials:
Throttle cable routing diagram
Throttle cable no. 1
Throttle cable no. 2
Clutch cablev
Front brake hose
Pass
the throttle cables in front of the front brake hose.
Pass the
clutch cable above the right air intake pipe.
Clamp the
clutch cable at the white taping point and m ...
Valve seat repair
The valve seats (1) for both the intake and exhaust
valves are machined to three different angles. The seat
contact surface is cut at 45°.
Intake valve
Exhaust valve
Caution
the valve seat contact area must be
inspected after e ...
Front seat
To remove the front seat.
Remove the bolts 1 (right and
left).
Raise the front end of the seat
and slide it forward.
To reinstall the seat, slide the seat
hooks into the seat hook retainers
on the frame and tighten the bolts
securely.
Warning
Failure to insta ...