Suzuki GSX-R 1000 Service Manual: Gearshift shaft / gearshift cam plate components

Gearshift lever height inspection and adjustment

Inspect and adjust the gearshift lever height in the following procedures:  inspect the gearshift lever height “a” between the lever top and footrest. Adjust the gearshift lever height i ...

Gearshift shaft construction

Gearshift shaft Washer Snap ring Gearshift shaft return spring Gearshift cam drive plate Gearshift plate return spring 8.5 N·m (0.85 Kgf-m, 6.0 Lb ...

Other materials:

Starter motor components
O-ring Housing end (inside) O-ring Starter motor case Armature Housing end (outside) 10 N·m (1.0 Kgf-m, 7.0 Lbf-ft) 4 N·m (0.4 Kgf-m, 3.0 Lbf-ft) 5 N·m (0.5 Kgf-m, 3.5 Lbf-ft) Apply grease to sliding surface Apply moly ...

Front brake disc removal and installation
Removal Remove the front wheel assembly. Refer to “front wheel assembly removal and installation” in section 2d .  Remove the front brake disc. Installation Install the front brake disc in the reverse order of removal. Pay attention to the following points:  make sure ...

Engine oil and filter replacement
Replace engine oil initially at 1 000 km (600 miles, 2 months) and every 6 000 km (4 000 miles, 12 months) thereafter Replace oil filter initially at 1 000 km (600 miles, 2 months) and every 18 000 km (11 000 miles, 36 months) thereafter Oil should be changed while the engine is warm. Oil filt ...