Fuel injection system description
Fuel system
The fuel delivery system consists of the fuel tank (1), fuel pump (2), fuel filter (3), fuel feed hose (4), fuel delivery pipes (5) including fuel injectors (6) and (7), fuel pressure regulator (8). There is no fuel return hose. The fuel in the fuel tank is pumped up by the fuel pump and pressurized fuel flows into the injectors installed in the fuel delivery pipe. Fuel pressure is regulated by the fuel pressure regulator. As the fuel pressure applied to the fuel injectors (the fuel pressure in the fuel delivery pipe) is always kept at absolute fuel pressure of approx. 294 Kpa (2.9 Kgf/cm2, 41.8 Psi), the fuel is injected into the throttle body in conic dispersion when the injector opens according to the injection signal from the ecm.
The fuel relieved by the fuel pressure regulator flows back to the fuel tank.
|
Radiator inspection and cleaning
Radiator hose inspection
Refer to “cooling system inspection” in section 0b .
Radiator inspection
Inspect the radiator for water leaks. If any defects are
found, replace the radiator with a new one.
If the fins are bent or dented, repair them by carefully
straightening them with the blade of ...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Front brake components”
Special tool
...
Exhaust control system description
The exhaust control system (excs) consists of the exhaust control valve (excv),
exhaust control valve actuator
(excva) and exhaust control valve cables (excv cables).
Excv is installed in the exhaust pipe. Excva is mounted inside of the right
frame. The excv is operated by the
excva via the ...