Suzuki GSX-R 1000 Service Manual: Horn removal and installation
Removal
- Disconnect the horn coupler (1).
- Remove the horn (2) by removing the mounting bolts.
Installation
Install the horn in the reverse order of removal.
Horn inspection
Note
if the horn sound condition is normal, it is not
necessary to inspect the horn button
continuity.
Horn button inspection
Remove the air cleaner box. Refer to “air cleane ...
Specifications
Service data
Wattage
unit: w
Tightening torque specifications
Reference: for the tightening torque of fastener not specified in this
section, refer to “tightening torque list” in section ...
Other materials:
Balancer shaft journal bearing inspection
and selection
Refer to “engine bottom side disassembly” (page 1d-
49).
Refer to “engine bottom side assembly” .
Inspection
Inspect the bearing surfaces for any signs of fusion,
pitting, burn or flaws. If any, replace them with a
specified set of bearings.
Selection
Place the plastigauge axial ...
Drive chain related components
Drive chain
Engine sprocket
Rear sprocket
Dust seal
Bearing
Retainer
Sprocket mounting drum
Wheel damper
145 N·m (14.5 Kgf-m,
105.0 Lbf-ft)
60 N·m
(6.0 Kgf-m, 43.0 Lbf-ft)
Apply grease
Apply thread lock to
thread p ...
Precautions
Keep away from fire or spark.
During disassembling, use care to minimize spillage of
gasoline.
Spilled gasoline should be wiped off immediately.
Work in a well-ventilated area.
For e-33 models, drain fuel from the fuel tank before
...