The ignitionr switch has 4 positions:
"Off" position
All electrical circuits are cut off.
The engine will not start. The key can be removed.
"On" position
The ignition circuit is completed and the engine can run. The headlight and taillight will automatically turn on. The key cannot be removed in this position.
Note
: start the engine promptly after turning the key to the "on" position, or the battery will lose power due to consumption by the headlight and taillight.
"Lock" position
All electrical circuits are off. The key can be removed and the steering will be locked. Turn the steering all the way to the left and push down the key and turn it to the "lock" position.
"P" (parking) position
Taillight will come on to increase visibility for temporary road side parking at night. The key can be removed and the steering will be locked.
Warning
Moving the motorcycle while the steering is locked can be hazardous. You could lose your balance and fall, or you could drop the motorcycle. Stop the motorcycle and place it on the side stand before locking the steering. Never attempt to move the motorcycle when the steering is locked. |
Note
: the key hole can be covered by turning the lid for antitheft purpose.
Turn the ignition switch to "lock" position and change the lid hole position when leaving your motorcycle.
Align the lid hole position with the key hole position when inserting the key.
Oil cooler / oil cooler hose removal and
installation
Refer to “electrical components location” in section 0a .
Removal
Turn the ignition switch off.
Remove the left side cowling. Refer to “exterior parts removal and
installation” in section 9d .
Drain engine oil. Refer to “engine oil and filter replacement” in
section 0b .
...
Iat sensor removal and installation
Removal
Remove the air cleaner box. Refer to “air cleaner box removal and
installation” in section 1d .
Remove the iat sensor (1) from the air cleaner box.
Installation
Install the iat sensor in the reverse order of removal.
Pay attention to the following point:
t ...
Storage procedure
If your motorcycle is to be left
unused for an extended period of
time, it needs special servicing
requiring appropriate materials,
equipment and skill. For this reason,
suzuki recommends that you
trust this maintenance work to
your suzuki dealer. If you wish to
service the machine for stora ...