When inspecting the chain, look for the following:
If you find anything wrong with the drive chain condition or adjustment, correct the problem if you know how. If necessary, consult your authorized suzuki dealer.
Damage to the drive chain means that the sprockets may also be damaged. Inspect the sprockets for the following:
Note
: the two sprockets should be inspected for wear when a new chain is installed and replaced if necessary.
If you find any of these problems with your sprocket, consult yoursuzuki dealer.
Warning
An incompletely riveted master link, or a joint-clip type master link, may come apart and cause an accident or severe engine damage. Do not use a joint-clip type chain. Chain replacement requires a special riveting tool and a high-quality, non-jointclip type chain. Ask an authorized suzuki dealer or qualified mechanic to perform this work. |
Rear brake components
Rear brake caliper
Piston seal
Dust seal
Piston
Rear caliper bracket
Rear brake pad set
Rear brake disc
Brake pad spring
6
N·m (0.6 Kgf-m, 4.5 Lbf-ft)
27 N·m
(2.7 Kgf-m, 19.5 Lbf-ft)
12 N·m
(1.2 Kgf-m, 8.5 Lbf-ft)
17 N·m ...
General precautions
Proper service and repair procedures are
important for the safety of the service
mechanic and the safety and reliability of
the motorcycle.
When 2 or more persons work together,
pay attention to the safety of each other.
When it is necessary to run the ...
Front brake caliper disassembly and
assembly
Refer to “front brake caliper removal and installation” .
Note
the right and left calipers are installed
symmetrically and therefore the disassembly
procedure for one side is the same as that for
the other side.
Disassembly
Remove the brake pads (1) and spring from the
...