Warning
Always perform a pre-ride inspection before each ride. Refer to the table on page 4-4 for check items. For further details, refer to the inspec· tion and maintenance section. |
Warning
Follow all instructions in the tires section in this owner's manual. |
Check the condition of the motorcycle to help make sure that you do not have mechanical problems or get stranded somewhere when you ride. Before riding the motorcycle, be sure to check the following items. Be sure your motorcycle is in good condition for the personal safety of the rider, passenger and protection of the motorcycle.
Warning
Shut the engine off when performing maintenance checks, except when checking the engine stop switch and throttle. |
What to check |
Check for: |
Steering |
|
Throttle |
|
Clutch |
|
Brakes |
|
Suspension | Smooth movement |
Fuel | Enough fuel for the planned distance of operation |
Drive chain |
|
Tires |
|
Engine oil | Correct level |
Cooling system |
|
Lighting | Operation of all lights and indicators |
Horn | Correct function |
Engine stop switch | Correct function |
Side stand/ ignition interlock switch | Proper operation |
Special tools and equipment
Special tool
...
Light bulb replacement
The wattage rating of each bulb is
shown in the following chart.
When replacing a burned-out
bulb, always use the same wattage
rating according to the following
chart.
Caution
Using a light bulb with the
wrong wattage rating can
cause electrical system damage
or shorte ...
Excv cable removal and installation
Removal
Turn the ignition switch off.
Remove the front seat. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Remove the left side cowling. Refer to “exterior parts removal and
installation” in section 9d .
Connect the special tool (mo ...