Toyota RAV4 manuals

Suzuki GSX-R 1000 Service Manual: Isc valve reset

When removing or replacing the throttle body assembly, reset the isc valve learned value in the following procedures:

  1.  turn the ignition switch on position.
  2. Set up the sds tools. (Refer to the sds operation manual for further details.)
  3.  Click “active control”.
  4.  Click “isc learned value reset” (1).

Suzuki GSX-R. Isc valve reset


  1. Click “reset” button (2) to clear the isc learned value.

Suzuki GSX-R. Isc valve reset


Note

the learned value of the isc valve is set at reset position.

Suzuki GSX-R. Isc valve reset


  1. Close the sds tool.
  2.  Turn the ignition switch off position.
Note

the isc valve opening initialization is automatically started after the ignition switch is turned off.

Throttle valve synchronization
Check and adjust the throttle valve synchronization among four cylinders.  Start the engine and run it in idling condition for warming up.  Stop the warmed-up engine.  Lif ...

Tp reset
When replacing the throttle body assembly or tp sensor with a new one or reinstalling the tp sensor, reset the tp learned value in the following procedures: Note keep the throttle valves ...

Other materials:

Lower light bulb
Turn the socket 1 counterclockwise and remove it. Turn the socket 2 counterclockwise and remove it.  Remove the bulb 3 from the socket. Caution Oil from your skin may damage the headlight bulb or shorten its life. Grasp the new bulb with a c ...

Steering components
Steering stem head nut Steering stem upper bracket Steering stem lock-nut Washer Steering stem nut Dust seal cover Dust seal Steering stem upper bearing Steering stem lower bearing Lower seal Steering stem lower bracket Steering stem lo ...

Starter motor will not run
Note make sure the fuses are not blown and the battery is fully-charged before diagnosing. Troubleshooting Step Action Yes No 1 Shift the transmission into neutral.  Grasp the clutch lever, turn on the ignition switch ...

© 2011-2024 Copyright www.suzukigsxr.org