Toyota RAV4 manuals

Suzuki GSX-R 1000 Owners Manual: Location of labels

Read and follow all of the warnings labeled on your motorcycle.

Make sure you understand all of the labels. Keep the labels on your motorcycle. Do not remove them for any reason.

Suzuki GSX-R. Location of labels


1

Warning


  • Keep windshield clean at all times.
  •  Clean only with a soh cloth and warm water with a mild detergent.
  •  Minor scratches may be removed by polishing with a commercially available plastic polish. Make sure the plastic polish does not contain an abrasive compound. As it may cause permanent scratches.
  •  Replace windshield if it becomes scratched or discolored so as to interfere with view.
  •  Avoid using any alkaline or strong acid cleaner. Gasoline, brake fluid, or any other solvent.
  •  When replacing windshield, use suzuki replacement windshield.

2

Warning


Failure to follow these safety precautions may increase your risk of injury:

  •  wear a helmet, eye protection. And bright protective clothing.
  •  Don't ride after consuming alcohol or other drugs.
  •  Slow down on slippery surfaces. Unfamiliar terrain, or when visibility is reduced .
  •  Read owner's manual carefully.

3


4

Warning


  • Check tire condition, wear, and cold tire pressure before each ride.
  •  Replace only with tubeless tires of listed size and type.
  •  Read owner's manual for more information.


Suzuki GSX-R. Location of labels


5

The owner's manual contains important safety information and instructions which should be read carefully before operating the vehicle.

If the vehicle has been resold. Obtain the owner's manual from the previous owner or contact your local suzuki dealer for assistance.

6

Warning


Do not carry any objects in the space behind the fairing or on the fairing support bars.

Objects placed in these area can interfere with steering and can cause loss of control.

Serial number location
You need to know the frame and engine serial numbers to get title documents for your motorcycle. You also need these numbers to help your dealer when you order parts. The frame number 1 is ...

Specifications
...

Other materials:

Swingarm bearing removal and installation
Removal Remove the swingarm. Refer to “swingarm removal and installation” .  Remove the swingarm pivot bearings (1) using the special tool. Special tool (a): 09921–20240 (bearing remover set) Remove the center spacer (2). Remove the cushion lever bearing (3) usin ...

Cushion rod bearing removal and installation
Removal Remove the cushion rod. Refer to “cushion rod removal and installation” .  Remove the cushion rod bearing with the special tool. Special tool (a): 09921–20240 (bearing remover set) Installation Caution the removed bearings must be replaced with new on ...

Specifications
Service data Fi sensors Tightening torque specifications Reference: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c . ...

© 2011-2024 Copyright www.suzukigsxr.org