Suzuki GSX-R 1000 Owners Manual: Modification
Modification of the motorcycle, or removal of original equipment may render the vehicle unsafe or illegal. Obey all applicable equipment regulations in your area.
The frame of this motorcycle is made of an aluminum alloy.
Therefore, never make any modifications such as drilling or welding to the frame as it weakens the frame significantly. This could result in an unsafe vehicle operating condition and subsequent accident. Suzuki will not be responsible in any way for personal injury or damage to the motorcycle caused by frame modifications.
Bolt-on-accessories that do not modify the frame in any way may be installed, provided that the loading limit is not exceeded. For loading limit, refer to the accessory use and motorcycle loading section of the owner's manual.
 Warning
This could result in an unsafe operating condition and may lead to an accident. Never make any modifications to the frame. |
Loading guidelines
This motorcycle is primarily
intended to carry small items
when you are not riding with a
passenger. Follow the guidelines
below to carry a passenger or
cargo:
balance the load between ...
Inspection and maintenance
Notice
Maintenance, replace·
ment or repair of the
emission control devices
and systems may be per·
formed by any motorcy·
cle repair establishment
or individual using any
...
Other materials:
Transmission removal
Remove the engine assembly from the frame. Refer to “engine assembly
removal” in section 1d .
Remove the engine top side. Refer to “engine top side disassembly” in
section 1d .
Separate the upper and lower crankcases. Refer to “engine bottom side
disassembly” in section 1 ...
Drive chain
This motorcycle has a master link
type drive chain. We recommend
that you take your motorcycle to
an authorized suzuki dealer if the
drive chain needs replacing.
The condition and adjustment of
the drive chain should be checked
each day before you ride. Always
follow the guidelines for ins ...
Front brake light switch inspection
Inspect the front brake light switch in the following
procedures:
disconnect the front brake light switch coupler (1).
Inspect the front brake light switch for continuity with
the tester.
If any abnormality is found, replace the front brake light switch with a new
one. Re ...