Refer to “exterior parts removal and installation” in section 9d .
Oil cooler hose inspection
Inspect the oil cooler hoses for any damage and oil leakage. If any defects are found, replace the oil cooler hose with a new one.
Oil cooler inspection
Oil cooler cleaning
Caution
|
Installation
Install the oil cooler and oil cooler hoses in the reverse order of removal. Pay attention to the following points:
: Thread lock cement
99000–32110
(thread lock cement super “1322” or
equivalent)
Caution replace the o-rings with new ones to prevent oil leakage. |
: Thread lock cement
99000–32110
(thread lock cement super “1322” or
equivalent)
Crankcase emission control system
description
The engine is equipped with a pcv system to prevent discharging crankcase
emissions into the atmosphere. Blow-by
gas in the engine is constantly drawn into the crankcase, which is returned to
the combustion chamber through the
pcv (breather) hose, air cleaner and throttle body.
...
Brakes
This motorcycle has front and
rear disk brakes.
Warning
Failure to inspect and properly
maintain the brakes increases
your chance of having an accident.
Inspect the brake system
before each use according to
the inspection before
riding section. Follow the
maintenance ...
Tire inspection
Inspect tire
every 6 000 km (4 000 miles, 12 months)
Tire tread condition
Operating the motorcycle with excessively worn tires will
decrease riding stability and consequently invite a
dangerous situation. It is highly recommended to replace
a tire when the remaining depth of tire tread reaches ...