Suzuki GSX-R 1000 Service Manual: Oil pressure regulator / oil strainer inspection
Refer to “oil pan / oil pressure regulator / oil strainer removal and installation” .
Oil pressure regulator
Inspect the operation of the oil pressure regulator by pushing the piston with a proper bar.
If the piston does not operate smoothly, replace the oil pressure regulator with a new one.
Oil strainer
Clean the oil strainer if necessary.
Inspect the oil strainer body for damage. If necessary, replace it with a new one.
Oil pan / oil pressure regulator / oil strainer
removal and installation
Note
the oil pan/oil strainer/oil pressure regulator
cannot be serviced with the engine installed
in the frame.
Removal
Remove the engine assembly from the frame. Refer to “e ...
Oil cooler / oil cooler hose inspection and
cleaning
Refer to “exterior parts removal and installation” in section 9d .
Oil cooler hose inspection
Inspect the oil cooler hoses for any damage and oil
leakage. If any defects are found, replace the oil ...
Other materials:
Side stand
An interlock switch is provided to
cut off the ignition circuit when the
side stand is down and the transmission
is in any gear other than
neutral.
The side stand/ignition interlock
switch works as follows:
if the side stand is down and
the transmission is in gear, the
engine ...
Dimmer / passing light switch inspection
Inspect the dimmer/passing light switch in the following
procedures:
remove the air cleaner box. Refer to “air cleaner box removal and
installation” in section 1d .
Disconnect the left handlebar switch coupler (1).
(Yellow)
Inspect the dimmer/passing light switch ...
Front fork parts inspection
Refer to “front fork disassembly and assembly” .
Inner and outer tubes
Inspect the inner tube and outer tube for scratches
Slide bushing / guide bushing
Inspect the slide bushing and guide bushing for wear or
damage. If they are worn or damaged, replace them with
new ones. If they are not ...