Note I = inspect and clean, adjust, replace or lubricate as necessary. R = replace. T = tighten. |
Throttle body removal and installation
Removal
Remove the side cowlings. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Remove the air cleaner box. Refer to “air cleaner box removal and
installation” .
Remove the clamps (1).
Disconnect the iap sensor (2) from the vacuum
...
Engine oil and filter replacement
Replace engine oil
initially at 1 000 km (600 miles, 2 months) and every
6 000 km (4 000 miles, 12 months) thereafter
Replace oil filter
initially at 1 000 km (600 miles, 2 months) and every
18 000 km (11 000 miles, 36 months) thereafter
Oil should be changed while the engine is warm. Oil filt ...
Gearshift linkage inspection
Refer to “gearshift shaft / gearshift cam plate removal and installation” .
Gearshift shaft
Check the gearshift shaft for bend or wear.
Check the return spring for damage or fatigue.
If any defects are found, replace the defective part(-s).
Gearshift shaft oil seal
Inspect the gearshif ...