Precautions for engine cooling system
|
Precautions for engine coolant
Refer to “engine coolant recommendation” in section 0a .
Cylinder head related parts inspection
Refer to “cylinder head disassembly and assembly” .
Cylinder head distortion
Decarbonize the combustion chambers.
Check the gasket surface of the cylinder head for
distortion. Use a straightedge and thickness gauge.
Take clearance readings at several places. If
readings exceed the ...
Engine bottom side assembly
Assemble the engine bottom side in the reverse order of
disassembly. Pay attention to the following points:
Note
apply engine oil to each running and sliding
part before reassembling.
Breather oil return plate
When installing the breather oil return plate (1), apply
thread loc ...
Transmission removal
Remove the engine assembly from the frame. Refer to “engine assembly
removal” in section 1d .
Remove the engine top side. Refer to “engine top side disassembly” in
section 1d .
Separate the upper and lower crankcases. Refer to “engine bottom side
disassembly” in section 1 ...