Suzuki GSX-R 1000 Owners Manual: Procedure for returning to service
- Clean the entire motorcycle.
- Remove the oily rags from the air cleaner intake and muffler outlet.
- Drain all the engine oil. Install a new oil filter and fill the engine with fresh oil as outlined in this manual.
- Remove the spark plugs. Turn the engine a few times. Reinstall the spark plugs.
- Reinstall the battery.
- Make sure that the motorcycle is properly lubricated.
- Perform the inspection before riding as listed in this manual.
- Start the motorcycle as outlined in this manual.
Storage procedure
If your motorcycle is to be left
unused for an extended period of
time, it needs special servicing
requiring appropriate materials,
equipment and skill. For this reason,
suzuki recommends that yo ...
Corrosion prevention
It is important to take good care of
your motorcycle to protect it from
corrosion and keep it looking new
for years to come.
Important information about
corrosion
Common causes of corrosion
...
Other materials:
Front brake master cylinder / brake lever disassembly and assembly
Refer to “front brake master cylinder assembly removal and installation” .
Disassembly
Remove the reservoir cap (1), plate (2), diaphragm
(3) and reservoir tank (4).
Remove the brake light switch (5) and brake lever
(6).
Remove the dust boot (7) and push rod (8).
...
Specifications
Service data
Electrical
unit: mm
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Starter motor components”
Reference: for the tightening torque of fastener not specified in this
section, refer to “tightening to ...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Clutch control system components” “clutch components”
Special tool
...