Suzuki GSX-R 1000 Service Manual: Rear brake light switch inspection
Inspect the rear brake light switch in the following procedures:
- lift and support the fuel tank. Refer to “fuel tank removal and installation” in section 1g (page 1g- 9).
- Disconnect the rear brake light switch lead wire coupler (1).
- Inspect the rear brake light switch for continuity with
the tester.
If any abnormality is found, replace the rear brake light switch with a new one.
Special tool
: 09900–25008 (multi circuit
tester set)
Tester knob indication continuity ( )
Rear brake light switch
- Connect the rear brake light switch lead wire coupler.
- Reinstall the fuel tank. Refer to “fuel tank removal and installation” in section 1g .
Front brake light switch inspection
Inspect the front brake light switch in the following
procedures:
disconnect the front brake light switch coupler (1).
Inspect the front brake light switch for continuity with
t ...
Rear brake light switch inspection and adjustment
Check the rear brake light switch so that the brake light
will come on just before pressure is felt when the brake
pedal is depressed. If the brake light switch adjustment
is necessary, turn the ad ...
Other materials:
Idle speed
Adjust the engine idle speed periodically on the engine at normal operating
temperature.
To adjust the idle speed:
Lift the fuel tank by referring to
the air cleaner section.
Start the engine and warm it
up by running at idling speed
for 10 minutes in summer
(where ambie ...
Service data
Valve + guide
unit: mm (in
Camshaft + cylinder head
unit: mm (in
Cylinder + piston + piston ring
unit: mm (in)
Conrod + crankshaft
unit: mm (in)
Balancer
unit: mm (in)
Throttle body
...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Clutch control system components” “clutch components”
Special tool
...