Suzuki GSX-R 1000 Service Manual: Rear brake pedal construction

Rear brake master cylinder parts inspection

Refer to “rear brake master cylinder disassembly and assembly” . Master cylinder Inspect the master cylinder bore for any scratches or other damage. Piston / rubber parts Inspect the piston s ...

Rear brake pedal removal and installation

Removal Remove the master cylinder assembly. Refer to “rear brake master cylinder assembly removal and installation” .  Disconnect the rear brake light switch lead wire coupler. Refer to ...

Other materials:

Starter motor inspection
Refer to “starter motor disassembly and assembly” . Carbon brush Inspect the carbon brushes for abnormal wear, cracks or smoothness in the brush holder. If either carbon brush is defective, replace the brush holder set with a new one. Measure the length “a” of the carbon brushes using a v ...

Fuses
The main fuse is located under the front seat. To access the fuse, remove the seat by referring to the seat lock and helmet holders. The fuses are located inside the left fairing. One 1 oa and one 15a spare fuses are provided inside the fuse box. They are designed to open when ...

Rear brake light switch inspection and adjustment
Check the rear brake light switch so that the brake light will come on just before pressure is felt when the brake pedal is depressed. If the brake light switch adjustment is necessary, turn the adjuster nut (1) in or out while holding the brake pedal. Brake fluid level check Refer to “bra ...