Suzuki GSX-R 1000 Service Manual: Repair instructions

Battery runs down quickly

Troubleshooting Step Action Yes No 1 Check accessories which use excessive amounts of electricity. Are accessories being installed? Remove accesso ...

Battery current leakage inspection

Inspect the battery current leakage in the following procedures:  turn the ignition switch off.  Remove the front seat. Refer to “exterior parts removal and installation” in section ...

Other materials:

Headlight
To replace the headlight bulbs, perform the following steps: Upper light bulb Remove the bolt 1 to lift the instrument panel 2. Turn the cap 3 counterclockwise and remove it. Unhook the bulb holder spring 4 and pull out the socket 5.  Pull off the bulb from ...

Ignition switch removal and installation
Removal Remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .  Disconnect the ignition switch lead wire coupler (1).  Disconnect the immobilizer lead wire coupler (2). (For e-02, 19, 24, 51) Remove the harness clamp (3). ...

Transmission removal
Remove the engine assembly from the frame. Refer to “engine assembly removal” in section 1d .  Remove the engine top side. Refer to “engine top side disassembly” in section 1d .  Separate the upper and lower crankcases. Refer to “engine bottom side disassembly” in section 1 ...