Clutch removal
Drain engine oil. Refer to “engine oil and filter replacement” in
section 0b .
Lift and support the fuel tank with the prop stay.
Refer to “fuel tank removal and installation” in section 1g .
Disconnect the ckp sensor coupler (1).
Remove the clutch cover (2).
...
Cylinder head cover disassembly and
assembly
Disassembly
Remove the cylinder head cover. Refer to “engine top side disassembly” .
Remove the gaskets (1) and (2).
Remove the pair control solenoid valve (3) along
with the pair reed valve covers (4).
Remove the pair reed valves (5) and cmp sensor
(6).
As ...
Wiring harness routing diagram
Wiring harness no. 2
Tapping clamp
: insert the clamp from the front side. Place the turn signal
and position light couplers in front of the clamp.
Steel clamp
: clamp the wiring harness at the blue taping point. Bend
the steel clamps to the front side.
...