Suzuki GSX-R 1000 Service Manual: Rod guide case tightening torque
Tighten the rod guide case in the following procedures: measure the effective length l of the torque wrench.
Calculate the reading torque on the torque wrench by use of the formula shown below.
Special tool
(a): 09940–84710 (rod guide case
wrench)
| T: reading torque on the torque wrench |
| Ts: specified torque |
| Ls: 0.05 M (1.97 In) |
| L: effective length of the torque wrench |
Front fork parts inspection
Refer to “front fork disassembly and assembly” .
Inner and outer tubes
Inspect the inner tube and outer tube for scratches
Slide bushing / guide bushing
Inspect the slide bushing and guide bus ...
Specifications
Service data
Suspension
unit: mm (in)
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Front fork components”
Re ...
Other materials:
Headlight bulb and position light bulb
replacement
Caution
when you touch the bulb with your bare
hands, clean the bulb with a cloth moistened
with alcohol or soap water to prevent
premature bulb failure.
Low beam bulb
Remove the combination meter. Refer to “combination meter removal and
installation” in section 9c .
...
Specifications
Service data
Wattage
unit: w
Tightening torque specifications
Reference: for the tightening torque of fastener not specified in this
section, refer to “tightening torque list” in section 0c . ...
Self-diagnosis function
The self-diagnosis function is incorporated in the ecm. The function has two
modes, “user mode” and “dealer mode”.
The user can only be notified by the lcd (display) panel and led (fi indicator
light). To check the function of the
individual fi system devices, the dealer mode is provided. In ...