Suzuki GSX-R 1000 Service Manual: Side-stand removal and installation
Removal
- Support the motorcycle with a jack or wooden block.
Caution
|
- Remove the side-stand as shown in the side-stand construction. Refer to “side-stand construction” .
Installation
Install the side-stand as shown in the side-stand construction. Refer to “side-stand construction” .
Pillion footrest construction
Pillion footrest
Spring
Ball
E-ring
Washer
O-ring
Footrest pin
Apply grease.
Do not reuse.
...
Specifications
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Body frame construction” “front footrest bracket construction”
“si ...
Other materials:
Specifications
Service data
Drive train
unit: mm (in) except ratio
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Transmission components” “gearshift lever construction”
“gearshift shaft / gearshift cam plate componen ...
Fuel injector inspection and cleaning
Inspect the fuel injector in the following procedures:
remove the fuel injector. Refer to “throttle body disassembly and
assembly” in section 1d .
Check the fuel injector for evidence of dirt and
contamination. If present, clean and check for
presence of dirt in the fuel lin ...
Engine stop switch inspection
Inspect the engine stop switch in the following
procedures:
turn the ignition switch off.
Remove the air cleaner box. Refer to “air cleaner box removal and
installation” in section 1d .
Disconnect the right handlebar switch coupler (1).
Inspect the engine stop ...