Recommended service material
Note required service material is also described in the following. “Throttle body components” “engine bottom side assembly” |
Special tool
Open circuit check
Possible causes for the open circuit are as follows. As
the cause can exist in the connector/coupler or terminal,
they need to be checked carefully.
Loose connection of connector/coupler.
Poor contact of terminal (due to dirt, corrosion or rust,
poor contact tension, entry of f ...
Rear wheel dust seal / bearing removal and installation
Removal
Remove the rear wheel assembly. Refer to “rear wheel assembly removal
and installation” .
Remove the rear sprocket mounting drum assembly
(1) from the rear wheel.
Remove the wheel dampers (2).
Remove the dust seal.
Special tool
(a): 09913–50121 (oil s ...
Balancer shaft disassembly and assembly
Refer to “engine bottom side disassembly” (page 1d-
49).
Refer to “engine bottom side assembly” .
Disassembly
Remove the balancer shaft. Refer to “engine bottom side disassembly” .
Remove the washers, balancer gear and dampers
from the shaft.
Assembly
Assembly is in the re ...