Service data
Electrical unit: mm
Tightening torque specifications
Note the specified tightening torque is described in the following. “Starter motor components” |
Reference
: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c .
Front brake master cylinder parts inspection
Refer to “front brake master cylinder / brake lever disassembly and assembly”
.
Master cylinder
Inspect the master cylinder bore for any scratches or
other damage
Piston / rubber parts
Inspect the piston surface for any scratches or other
damage.
Inspect the primary cup, secondary cup ...
Dimmer / passing light switch inspection
Inspect the dimmer/passing light switch in the following
procedures:
remove the air cleaner box. Refer to “air cleaner box removal and
installation” in section 1d .
Disconnect the left handlebar switch coupler (1).
(Yellow)
Inspect the dimmer/passing light switch ...
Swingarm related parts inspection
Refer to “swingarm removal and installation” (page 2c-
9).
Spacers
Remove the collar and spacer from the swingarm.
Inspect the collars and spacer for wear and damage.
If any defects are found, replace them with new
ones.
Chain buffer
Inspect the chain buffer for wear and ...