Suzuki GSX-R 1000 Service Manual: Specifications
Service data
Drive train unit: mm (in) except ratio
Tightening torque specifications
| Note the specified tightening torque is described in the following. “Drive chain related components” |
Reference
: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c .Reference: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c .
Drive chain replacement
Use the special tool in the following procedures, to cut
and rejoin the drive chain.
Note
when using the special tool, apply a small
quantity of grease to the threaded parts of
the s ...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Drive chain related components”
Special tool
...
Other materials:
Rear shock absorber adjustment
After installing the rear suspension, adjust the spring
pre-load and damping force as follows:
Spring pre-load adjustment
The set length 179.3 Mm (7.06 In) provides the
maximum spring pre-load.
The set length 189.3 Mm (7.45 In) provides the
minimum spring pre-load.
Std position
184.3 ...
Front fork components
Front fork cap
O-ring
Rebound damping force adjuster rod
Compression damping force adjuster rod
Piston rod nut
O-ring
Piston ring
Rod guide case
Spring
Piston rod
Spring collar b
Spring
Spring collar a
Slide bushing
Outer tu ...
Steering components
Steering stem head nut
Steering stem upper bracket
Steering stem lock-nut
Washer
Steering stem nut
Dust seal cover
Dust seal
Steering stem upper bearing
Steering stem lower bearing
Lower seal
Steering stem lower bracket
Steering stem lo ...