Suzuki GSX-R 1000 Service Manual: Specifications
Service data
Brake unit: mm (in)
Tightening torque specifications
| Note the specified tightening torque is described in the following. “Front brake components” |
Reference
: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c .
Front brake disc inspection
Brake disc thickness
Check the brake disc for damage or cracks and measure
the thickness using the micrometer.
Replace the brake disc if the thickness is less than the
service limit or if defect ...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Front brake components”
Special tool
...
Other materials:
Rear brake master cylinder parts inspection
Refer to “rear brake master cylinder disassembly and assembly” .
Master cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston / rubber parts
Inspect the piston surface for any scratches or other
damage.
Inspect the primary cup, secondary cup and dust boot
...
Radiator cap inspection
Inspect the radiator cap in the following procedures:
remove the radiator cap. Refer to “cooling circuit inspection” .
Attach the radiator cap (1) to the radiator tester (2)
as shown.
Slowly apply pressure to the radiator cap.
If the radiator cap does not hold the pre ...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Starter motor components”
Special tool
...