Suzuki GSX-R 1000 Service Manual: Specifications
Service data
Clutch unit: mm (in)
Tightening torque specifications
| Note the specified tightening torque is described in the following. “Clutch control system components” “clutch components” |
Reference
: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c .
Clutch lifter pin inspection and adjustment
Refer to “clutch removal” and “clutch installation” .
Note
when inspection and adjusting the clutch
lifter pin, it is not necessary to install the
clutch onto the countershaft.
...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Clutch control system components” “clutch components”
Special tool
...
Other materials:
Combination meter removal and installation
Removal
Remove the combination meter mounting bolt (1).
Bushing
Disconnect the coupler (2) and remove the
combination meter assembly (3).
Installation
Install the combination meter in the reverse order of
removal.
Note
fix the boot of ...
Rear brake caliper removal and installation
Removal
Remove the rear wheel. Refer to “rear wheel assembly removal and
installation” in section 2d .
Drain brake fluid. Refer to “brake fluid replacement” in section 4a .
Remove the brake hose from the caliper by
removing the union bolt (1) and catch the brake fluid
in a ...
Pair reed valve removal and installation
Removal
Lift and support the fuel tank with the prop stay.
Refer to “fuel tank removal and installation” in section 1g .
Remove the air cleaner box. Refer to “air cleaner box removal and
installation” in section 1d .
Remove the pair control solenoid valve (1) along with the ...