Tightening torque specifications
Note the specified tightening torque is described in the following. “Handlebar components” “steering components” “steering damper construction” |
Reference
: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c .
Specifications
Service data
Electrical
unit: mm
Caution
never use anything except the specified battery.
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Regulator / rectifier construction”
Reference: for the tig ...
Piston and piston ring inspection
Refer to “piston ring removal and installation” .
Piston diameter
Measure the piston diameter using the micrometer at 15
mm (0.6 In) “a” from the skirt end. If the piston diameter
is less than the service limit, replace the piston.
Special tool
(a): 09900–20203 (micrometer (50 –
75 mm))
Pis ...
Rear brake caliper parts inspection
Refer to “rear brake caliper disassembly and assembly” .
Brake caliper cylinder
Inspect the brake caliper cylinder wall for nicks,
scratches or other damage. If any damage is found,
replace the caliper with a new one.
Brake caliper piston
Inspect the brake caliper piston surface for any
s ...